Pilih Laman

Name

Dr. Aminnudin

Post

Mechancial engineering, Senior Lecturer

Academic
career

Mechanical Engineering


Mechanical Engineering

(Material manifacture)

Mechanical Engineerin (Material)


Menchanical Engineering (Manufacture) 

State University of Malang

Brawijaya Univeristy, Malang


Bandung Institute of Technologu


Brawijaya Univeristy, Malang

2003


2009

 


2003


1993

Employment

Lecturer

Universitas Negeri Malang

2003

Research and development projects over the last 5 years

Pemesinan biocompatible zr-based bulk metallic glass menggunakan sinking- electrical discharge machining (edm) dan ultrasonic machining (usm) pada aplikasi peralatan medis 

Rp. 90.000.000,-

Optimasi robust aerodinamik airfoil naca 0012 menggunakan algoritma evolusioner berbantu kriging metamodel

Rp. 75.000.000,-

Karakteristik mekanik baja micron kristal dengan penguat wolfram karbida

Rp. 82.000.000,-

Fabrikasi dan analisis performa peralatan medis menggunakan biocompatible zr- based bulk metallic glass dengan electrical discharge machining

Rp 71,500,000

Pengembangan armor komposit baja dan lava stone sebagai bahan alternatif pelindung kendaraan militer

Rp. 75,000,000

Kinerja elektroda berbasis selulosa bakteri sebagai penyimpan energi pada baterai lithium-ion

Rp. 100.500.000

Industry collaborations over the last 5 years

Project title

Partners

Patents and proprietary rights

Title

 

Year

Important publications over the last 5 years

Aminnudin. (2019). Lattice Strain in Aluminium after Plastic Deformation Process at A Cryogenic Temperature. IOP Conference Series: Materials Science and Engineering, 494(1). https://doi.org/10.1088/1757-899X/494/1/012016

Aminnudin, A., & Choiron, M. A. (2018). Heat treatment effect on metal matrix composite with brass matrix and fly ash. MATEC Web of Conferences, 204, 1–8. https://doi.org/10.1051/matecconf/201820405020

Aminnudin, A., Pratikto, Purnowidodo, A., & Irawan, Y. S. (2018). The analysis of friction effect on equal channel angular pressing (ECAP) process on Aluminium 5052 to homogeneity of strain distribution. Eastern-European Journal of Enterprise Technologies, 2(1–92), 57–62. https://doi.org/10.15587/1729-4061.2018.127006

Aminnudin, A., & Solichin, S. (2020). The Effect of Heat Treatment to the Erosion Rate of Brass Composite. Journal of Mechanical Engineering Science and Technology, 4(1), 37–42. https://doi.org/10.17977/um016v4i12020p037

Aminnudin, Pratiko, Purnowidodo, A., Irawan, Y. S., Haruyama, S., & Kaminishi, K. (2014). Evaluation grain homogeneity of aluminium after ECAP process by ECAP geometry analysis using taguchi method. Key Engineering Materials, 594595, 896–901. https://doi.org/10.4028/www.scientific.net/KEM.594-595.896

Aminnudin, Suryanto, H., & Suprayitno. (2020). Grain growth of powder metallurgy steel after heat treatment. Journal of Physics: Conference Series, 1446(1). https://doi.org/10.1088/1742-6596/1446/1/012016

Muhtadi, I., Puspitasari, P., Aminnudin, A., Permanasari, A. A., Sukarni, S., Pratama, M. M. A., & Putra, A. B. N. R. (2020). Time dependence of nickel-coated st60 steel corrosion rate in sulfuric acid media. Journal of Physics: Conference Series, 1595(1). https://doi.org/10.1088/1742-6596/1595/1/012008

Pradana, Y. R.A., Aminnudin, A., Suryanto, H., & Lubis, D. Z. (2019). Hardness distribution and impact toughness of carburized steel welded by SMAW. IOP Conference Series: Materials Science and Engineering, 494(1). https://doi.org/10.1088/1757-899X/494/1/012035

Pradana, Yanuar Rohmat Aji, Ferara, A., Aminnudin, A., Wahono, W., Jang, J. S. C., & Jang, J. S. C. (2020). The Effect of Discharge Current and Pulse-On Time on Biocompatible Zr-based BMG Sinking-EDM. Open Engineering, 10(1), 401–407. https://doi.org/10.1515/eng-2020-0049

Setyamarsa, Y. A., Suryanto, H., Kustono, D., Aminnudin, A., Pradana, Y. R. A., Lubis, D. Z., & Bintara, R. D. (2020). Influence of exposure time of acidic air on structure and strength of starch-nanoclay biocomposite. Journal of Physics: Conference Series, 1595(1). https://doi.org/10.1088/1742-6596/1595/1/012006

Suprayitno, Yu, J. C., Aminnudin, & Wulandari, R. (2020). Airfoil aerodynamics optimization under uncertain operating conditions. Journal of Physics: Conference Series, 1446(1). https://doi.org/10.1088/1742-6596/1446/1/012014

Suryanto, H., Marsyahyo, E., Surya Irawan, Y., Soenoko, R., & Aminudin. (2015). Improvement of interfacial shear strength of Mendong fiber (Fimbristylis globulosa) reinforced epoxy composite using the AC electric fields. International Journal of Polymer Science, 2015. https://doi.org/10.1155/2015/542376

Suryanto, H., Muhajir, M., Zakia, N., Yanuhar, U., Aminnudin, A., & Aji Pradana, Y. R. (2020). Effect of drying methods on the structure of bacterial cellulose from pineapple peel extract. Key Engineering Materials, 851 KEM, 79–85. https://doi.org/10.4028/www.scientific.net/KEM.851.79

Suryanto, H., Sahana, R. T., Aminnudin, Suyetno, A., Widiyanti, & Yanuhar, U. (2019). Effect of carrageenan on the structure of cassava starch bioplastic after extrusion process. AIP Conference Proceedings, 2120(July). https://doi.org/10.1063/1.5115761

Yanuar, R. A. P., Firhan, A. F., Aminnudin, A., Wahono, & Jang, J. S. C. (2020). Measuring the influence of process parameter on cucr electrode tool wear rate for biocompatible zr-based bmg cutting using sinking-edm. Key Engineering Materials, 851 KEM, 68–75. https://doi.org/10.4028/www.scientific.net/KEM.851.68

 

Activities in specialist bodies over the last 5 years

PII

Member

2018-Now

 

Name

Prof. Andoko

Post

Mechanical Engineering, Professor

Academic
career

Mechanical Engineering



Mechanical Engineering (Material and Manufacturing)


Mechanical Engineering


Mechanical Engineering Education 

State University of Malang


Brawijaya University


Gadjah Mada University


State University of Malang

1991



2011-2014



1997-2001



1985-1989

Employment

Lecturer

Universitas Negeri Malang

1991

Research and development projects over the last 5 years

1. Analysis of Residual Stress and Strains on Leaf Spring

2020 and Funding from Ministry of Higher Education Indonesia

Rp. 201.562.000

.

2. Failure Analysis of Connecting Rod

2020 and Funding from Ministry of Higher Education Indonesia

Rp. 100.000.000


3. Increasing the Value of Domestic Component Level (TKDN) Significantly through the Making of 5 Axis CNC Milling in the Framework of the Development of Unmanned Aerial Vehicle (UAV) and Jet Engine in the Industrial Revolution Era 4.0

2019 and Funding from Ministry of higher Education Indonesia

Rp. 350.000.000


4. The Effect of Amplitude Strain Low Cycle Fatigue (LCF) and High Cycle Fatigue (HCF) Nodular Cast Iron from Two Steps Austempered (TSA)

2019 and Funding from Ministry of Higher Education Indonesia

Rp. 100.000.000


5. Engineering Nodular Cast Iron on Low Cycle Fatigue (LCF), High Cycle Fatigue (HCF) and Transition 

2018-2020 and Funding from Ministry of Higher Education Indoneisa

Rp. 71.500.000

Industry collaborations over the last 5 years

Project title : Increasing the Value of Domestic Component Level (TKDN) Significantly through the Making of 5 Axis CNC Milling in the Framework of the Development of Unmanned Aerial Vehicle (UAV) and Jet Engine in the Industrial Revolution Era 4.0 (2019)

Partners : D-Tech Engineering Salatiga

Patents and proprietary rights

Title : Molding Sand for Casting Metal with Portland Cement Commined CA-Bentonite Binder

 

Year : 2017

Important publications over the last 5 years

Selected recent publications from a total of approx.

(53):

1. Author(s): M. Badaruddin,Sugiyanto, H. Wardono, Andoko, C.J. Wang, A.K. Rivai

Title: Improvement of Low-Cycle Fatigue Resistance in AISI 4140 Steel by Annealing Treatment

International Journal of Fatigue (IJF) Elsevier, 125 (2019) 406–417

2. Author(s): Andoko Andoko

Title: The Effects of Strain Amplitude and Low Cycle Fatigue (LCF) Behavior on Nodular Cast Iron with Two-Step Austempering (TSA) Process

Material Research Expres (MRX), IOP Publishing 

3. Author(s) : Andoko Andoko, Poppy Puspitasari, Femiana Gapsari

Title: Effect of Two-Step Austempering Time on Tensile Strength and Fracture Morphology of Austempered Ductile Iron (ADI).

International Review of Mechanical Engineering (IREME), 2019, Vol 13, ISSN: 1970-8734

4. Author(s): Andoko Andoko

Title:Crosshead Speed Effects on Ferro Casting Ductile (FCD) Tensile Strength and Faulty Morphology

MM Science Journal, 2019, Vol 10, ISSN: 1805-1476

5. Author(s) : Andoko Andoko, Poppy Puspitasari, Femiana Gapsari

Title: Fatigue Crack Growth Behaviour of Nodular Cast Iron Subjected to Two-Step Austempering

Metalurgija 2018, Vol 57, ISSN: 0543-5846


 

Activities in specialist bodies over the last 5 years

Organisation

Role

Period

Membership without a specific role need not be mentioned

Name

Prof. Dr. Heru Suryanto, S.T., M.T. IPM

Post

Mechanical Engineering, Lecturer

Academic
career

Mechanical Engineering (B.Sc)

Mechanical Engineering (M.Sc)

Mechanical Engineering (M.Eng)

Brawijaya University

Gajah Mada University

Brawijaya University

1991


2001


2010

Employment

Lecturer

Universitas Negeri Malang

1999

Research and development projects over the last 5 years

1. Interface Engineering of Epoxy – Mendong Fiber (Fimbristylis globulosa) Through Exposure to Electric Fields as Efforts to Increase the Strength of Natural Fiber Composites

2015-2016 and Funding from Hibah penelitian fundamental, DP2M Dikti

Rp. 110,000,000 


2. Synthesis and Characterization of Nanoclay Reinforced Cassava Starch Foam Bionanocomposite

2016 and Funding from DIPA Fakultas Teknik UM

Rp. 25,000,000


3. Sensor Engineering Based on Bacterial Nanocellulose From Pineapple Skin Waste for Smart Packaging Applications in Fishery Commodities

2018 and Funding from PNBP UM

Rp. 60,000,000


4. Development of Biocomposite Foam Based on Bacterial Nanocellulose Fiber / Titanium Oxide Nanoparticles as a Candidate for Oil Superabsorber Material

2019 and Funding from PNBP UM

Rp. 80,000,000


5. Development of bionanocomposite based on a blend of cassava starch and carrageenan seaweed with nanoclay as an environmentally friendly anti-bacterial food packaging

2017-2019 and Funding from DP2M Ristekdikti PTUPT

Rp. 352,100,000


6. Performance of Bacterial Cellulose-Based Electrodes as Energy Storage in Lithium-Ion Batteries

2020 and Funding from PNBP UM

Rp. 100,500,000

Industry collaborations over the last 5 years

Patents and proprietary rights

1. Cellulose extraction techniques from grasses using Pulsed Elelectric Fields (PEF)

IDS000002011

13 November 2018


2. Methods To Increase the Interfaces Shear Strength of Epoxy Matrix Composites with Natural Fiber Reinforcement

IDP000057350

21 March 2019


3. The method of making biocomposite films based on a blend of cassava starch and seaweed carrageenan with nanoclay as reinforcement

IDS000002888 

10 February 2020

Important publications over the last 5 years

Selected recent publication:

1. Author(s): Heru Suryanto, Eko Marsyahyo, Yudy Surya Irawan, Rudy Soenoko 

Title: Improvement of interfacial shear strength of mendong fiber (Fimbristylis globulosa) reinforced epoxy composite using the AC electric fields

International Journal of Polymer Science, 2015, ISSN: 1687-9422

2. Author(s): Fachruddin, Heru Suryanto, Solichin

Title: The Effect Of Spot Welding Electric Current Variation On Shift Strength, Hardness And Micro Structure On Dissimilar Connection Of Stainless Steel AISI 304 Steel With Low Carbon Steel ST 41

JURNAL TEKNIK MESIN, 2017, Vol 24 (2), ISSN: 0853-1633

3. Author(s): Wahyu Firmansyah, Heru Suryanto, Solichin

Title: The Effect Of Variation Of Point Welding Time Variation On Pulling Strength, Violence, And Micro Structure On Dissimilar Jointing Of AISI 304 Steel With Low Carbon Steel ST 41

JURNAL TEKNIK MESIN, 2017, Vol 24 (2), ISSN: 0853-1633

4. Author(s): Nanang Eko Wahyuningtiyas, Heru Suryanto 

Title: Effect of ultrasonic treatment on morphology and mechanical properties of bioplastic from cassava starch with nanoclay reinforcement

Journal of Metastable and Nanocrystalline Materials, 2017, Vol 29 Pages 35-41, ISBN: 303571309X

5. Author(s): Nanang Eko Wahyuningtiyas, Heru Suryanto

Title: Analysis of biodegradation of bioplastics made of cassava starch

Journal of Mechanical Engineering Science and Technology (JMEST), 2017, Vol 1 (1) Pages 24-31, ISSN: 2580-2402

6. Author(s): Heru Suryanto, Abdul Qolik

Title: The Effect of Variations in SMAW Welding Current on the Hardness and Tensile Strength of Dissimilar Stainless Steel 304 and ST 37

JURNAL TEKNIK MESIN, 2017, Vol 24 (1), ISSN: 0853-1633

7. Author(s): Poppy Puspitasari, Andoko, Heru Suryanto, Puput Risdanareni, Januarti Jaya Ekaputri

Title: Properties of Mn0. 4Zn0. 6Fe2O4 and Mn0. 6Zn0. 4Fe2O4 as Nanocatalyst for Ammonia Production

MATEC Web of Conferences, 2017, Vol 97 Pages 1029, ISBN: 2261-236X

8. Author(s): Poppy Puspitasari, Andoko, Heru Suryanto, Puput Risdanareni, Sandy Yudha, 

Title: Hardness improvement on low carbon steel using pack carbonitriding method with holding time variation

MATEC Web of Conferences, 2017, Vol 101 Pages 1012, ISBN: 2261-236X

9. Author(s): Nanang Eko Wahyuningtyas, Heru Suryanto, Eddy Rudianto, Sukarni, Poppy Puspitasari, 

Title: Thermogravimetric and Kinetic Analysis of Cassava Starch Based Bioplastic

Journal of Mechanical Engineering Science and Technology (JMEST), 2017, Vol 1 (2) Pages 69-77, ISSN: 2580-2402

10. Author(s): H. Suryanto, S.Jenuardy, D. Kustono, P. Puspitasari, D.Z. Lubis.

Title: Sonication assisted synthesis of biocomposite from starch/nanoclay and its properties

International Review of Mechanical Engineering, 2018, Vol 12 (3) Pages 272-278, ISSN: 1970-8742

11. Author(s): Heru Suryanto, Ahmad Atif Fikri, Avita Ayu Permanasari, Uun Yanuhar, Sukardi.

Title: Pulsed Electric Field Assisted Extraction of Cellulose From Mendong Fiber ( Fimbristylis globulosa ) and its Characterization

Journal of Natural Fibers, 2018, Vol 15 (3) Pages 406-415, ISSN: 1544-0478

12. Author(s): Sukarni, Uun Yanuhar, I N G Wardana, Sudjito, Nurkholis Hamidi, Widya Wijayanti, Yusuf Wibisono, Sumarli, I M Nauri, Heru Suryanto.

Title: Combustion of microalgae Nannochloropsis oculata biomass: cellular macromolecular and mineralogical content changes during thermal decomposition.

Songklanakarin Journal of Science & Technology, 2018, Vol 40 (6), ISSN: 0125-3395

13. Author(s): Heru Suryanto, Aminnudin, Sukarni, Yanuar R A Pradana, Reddy A Dharmabintara, Muhamad Muhajir, Fakris Muslim.

Title: Application of hydraulic pipe rollers in motor trail construction modification workshops

Jurnal KARINOV, 2018, Vol 1 (3)

14. Author(s): Poppy Puspitasari, Alief Muhammad, Heru Suryanto.

Title: Determination Of The Magnetic Properties Of Manganese Ferrite By The Coprecipitation Method At Different Ph Concentrations

High Temperature Material Processes, 2018, Vol 22 (4), ISSN: 1093-3611

15. Author(s): Heru Suryanto, Tito Arif Sutrisno, M Muhajir, Neena Zakia,

Uun Yanuhar.

Title: Effect of peroxide treatment on the structure and transparency of bacterial cellulose film

MATEC Web of Conferences, 2018, Vol 204 Pages 5015, ISSN: 2261-236X

16. Author(s): Moh Astono Basuki, Heru Suryanto, Aisyah Larasati, Poppy Puspitasari, Mujiono

Title: The effect of ZnO addition against crystallinity and water absorption capacity of biofoam based cassava starch reinforced bacterial cellulose

AIP Conference Proceedings, 2019, Vol 2120 (1) Pages 050016, ISSN: 1551-7616

17. Author(s): Heru Suryanto, M. Muhajir, T. A. Sutrisno, Mudjiono, N. Zakia, U. Yanuhar, 

Title: The Mechanical Strength and Morphology of Bacterial Cellulose Films: The Effect of NaOH Concentration

IOP Conference Series: Materials Science and Engineering, 2019, Vol 515 (1) Pages 0-7, ISSN: 1757-899X

18. Author(s): Susanto Arif Sardjono, Heru Suryanto, Aminnudin, Muhamad Muhajir.

Title: Crystallinity and morphology of the bacterial nanocellulose membrane extracted from pineapple peel waste using high-pressure homogenizer

AIP Conference Proceedings, 2019, Vol 2120 Pages 080015, ISSN: 1551-7616

19. Author(s): H Suryanto, S Jenuardy, D Kustono, R A Dharmabintara, J Maulana, U Yanuhar.

Title: The Influence of Ultrasonic Wave Treatment on the Mechanical Properties of Nanoclay-reinforced Starch Biocomposite

IOP Conference Series: Materials Science and Engineering, 2019, Vol 515 (1) Pages 12021, ISSN: 1757-899X

20. Author(s): H Suryanto, F A Kharismawan, A W Rahmawan, R T Sahana, M Muhajir, U Yanuhar.

Title: Influence of nanoclay on thermal decomposition of biocomposite matrix starch/carrageenan blend

IOP Conference Series: Materials Science and Engineering, 2019, Vol 494 (1) Pages 12077, ISSN: 1757-899X

21. Author(s): Heru Suryanto, A W Rahmawan, R T Sahana, M Muhajir, U Yanuhar, 

Title: Influence of carrageenan on the mechanical strength of starch bioplastic formed by extrusion process

IOP Conference Series: Materials Science and Engineering, 2019, Vol 494 (1) Pages 12075, ISSN: 1757-899X

22. Author(s): Y R A Pradana, Aminnudin, H Suryanto, D Z Lubis.

Title: Hardness distribution and impact toughness of carburized steel welded by SMAW

IOP Conference Series: Materials Science and Engineering, 2019, Vol 494 (1) Pages 12035, ISSN: 1757-899X

23. Author(s): Heru Suryanto, Riski Tata Sahana, Aminnudin, Agus Suyetno, Widiyanti, Uun Yanuhar.

Title: Effect of carrageenan on the structure of cassava starch bioplastic after extrusion process

AIP Conference Proceedings, 2019, Vol 2120 (1) Pages 80023, ISBN: 0735418608

24. Author(s): Taufiq Mahsuli, Heru Suryanto, Aisyah Larasati, Muhammad Muhajir.

Title: Mechanical properties of bacterial nanocellulose membrane from pineapple peel waste after homogenization process

AIP Conference Proceedings, 2019, Vol 2120 (1) Pages 5001, ISBN: 0735418608

25. Author(s): Tito Arif Sutrisno, Heru Suryanto, Retno Wulandari, M Muhajir.

Title: Effects of chemical treatment on the structure and morphology of bacterial cellulose film

AIP Conference Proceedings, 2019, Vol 41 2120 (1) Pages 40030, ISBN: 0735418608

26. Author(s): Heru Suryanto, Sukarni, Yanuar Rohmat Aji Pradana, 

Uun Yanuhar, Kris Witono.

Title: Effect of mercerization on properties of mendong (Fimbristylis globulosa) fiber.

Songklanakarin Journal of Science and Technology (SJST), 2019, Vol 41 (3), ISSN: 0125-3395

27. Author(s): Heru Suryanto, Lalang Patrya Mahera, Febri Adi Kharismawan, Septian Maulana Saragih, Solichin, Uun Yanuhar.

Title: Properties of Starch/Carrageenan Blend Biocomposite with Nanoclay Reinforcement.

Journal of Engineering Science & Technology Review, 2019, Vol 12 (5), ISSN: 1791-2377

28. Author(s): Heru Suryanto, Muhamad Muhajir, Tito Arif Sutrisno, Uun Yanuhar, Redyarsa D. Bintara.

Title: Effect of disintegration process on the properties of bacterial cellulose foam

Key Engineering Materials, 2020, Vol 851 Pages 86-91, ISSN: 1662-9795

29. Author(s): Muhamad Muhajir, Heru Suryanto, Aisyah Larasati.

Title: Effect of Alkalization on the Bacterial Cellulose Film Structure Produced Using the Pineapple Waste

Key Engineering Materials, 2020, Vol 851 Pages 92-96, ISBN: 3035716277

30. Author(s): Heru Suryanto, Muhamad Muhajir, Neena Zakia, Uun Yanuhar, Aminnudin, Yanuar Rohmat Aji Pradana, 

Title: Effect of Drying Methods on the Structure of Bacterial Cellulose From Pineapple Peel Extract

Key Engineering Materials, 2020, Vol 851 Pages 79-85, ISBN: 3035716277

31. Author(s): Heru Suryanto, Didan Aditya Dwi Fitrasakti, Aditya Rizky Ramadhani, Agus Suyetno, Aminnudin.

Title: The effect of extrusion speed on mechanical properties of starch-based biocomposite

AIP Conference Proceedings, 2020, Vol 2231 (1) Pages 40059, ISBN: 0735419906

32. Author(s): H Suryanto, T A Sutrisno, U Yanuhar, R Wulandari.

Title: Morphology and structure of bacterial cellulose film after ionic liquid treatment

Journal of Physics: Conference Series, 2020, Vol 1595 (1) Pages 12028, ISBN: 1742-6596

33. Author(s): Y A Setyamarsa, H Suryanto, D Kustono, Aminnudin, Y R A Pradana, D Z Lubis, R D Bintara, 

Title: Influence of exposure time of acidic air on structure and strength of starch-nanoclay biocomposite

Journal of Physics: Conference Series, 2020, Vol 1595 (1) Pages 12006, ISBN: 1742-6596

Activities in specialist bodies over the last 5 years

Organisation

Master Program of Mechanical Engineering Department, State University of Malang


IMEEEC International Seminar


Committee for establishing the professional engineer program department


State University of Malang’s birthday committee


Journal Mechanical Engineering Science and Technology, State University of Malang


Bioresource (North Carolina State University), Journal of Natural Fiber, Cogent Engineering (Taylor and Franchis pub.), Fibers and Polymer, SN Applied Science (Springer Pub.), Jurnal Teknologi dan Pengajaran (FT UM), Journal of Engineering Science & Technology (Taylor University, Malaysia), Jurnal Kimia Sains dan Aplikasi (University of Diponegoro)


Center for Academic Publications, Faculty of Engineering, State University of Malang


Journal of Mechanical Engineering Science and Technology 


The Institution of Engineers Indonesia

Role

Coordinator





Chairman



Chairman




Secretary




Editor





Reviewer













Chairman




Chief editor



Members of Education Section for PII board for East Java Region

Period

2017-2019





2016



2016




2016




2019





2015-2019













2019-2020




2019-2020



2016-2019



Name

Rr. Poppy Puspitasari, Ph.D

Post

Mechanical Engineering, Associate Professor

Academic
career

Mechanical Engineering



Electrical and Electronics Engineering (Nanomaterial)


Mechanical Engineering

(Material)

Mechanical Engineering Education (material)

State University of Malang


University Technology Petronas

Bandung Intitute of Technology


State University of Malang

2008



2008-2012



2004-2007 



1995-2001

Employment

Lecturer

Universitas Negeri Malang

2008

Research and development projects over the last 5 years

1. Synthesis and Characterization of Nickel Cobalt Oxide for Supercapacitor

2021 and Funding from Ministry of Higher Education Indonesia

Rp. 99.885.000 


2. Synthesis, Characterization, and Application of Eggshell Nanopowder as Calcium Source for Joint Implant

2017-2020 and Funding from Ministry of higher Education Indonesia

Rp. 254.475.000


3. Synthesis, Characterization, and Application MnZn Ferrite as Magnetic Nanomaterial

2015-2016 and Funding from Ministry of Higher Education Indonesia

Rp. 359.171.000


4. Development of Composite Biomaterial and the Application of Nanoteknologi for Human Bone Implant

2013-2015 and Funding from Ministry of Higher Education Indoneisa

Rp. 265.000.000

Industry collaborations over the last 5 years

Patents and proprietary rights

1. Sand Casting using Sidoarjo Mud as the Binder

2. Surface Hardening using Carbonitriding Method

3. Composition of Nanocomposite ZnO and Al2O3 for Joint Implant

4. Multistep Artificial Aging for Duralium

5.Catalyst Holder in Vehicle Exhaust Pipe

6. Composition of Manganese Zinc Ferrite Nanocatalyst to Reduce Exhaust Emission Gas

7. Composition of Eggshell Nanopowder for Sand Casting Binder 

8. Eggshell Nanopowder for Reinforced Agent in Aluminium Silicon Alloy



2015

2016


2016



2018


2018


2018



2020


2020



Important publications over the last 5 years

Selected recent publications from a total of approx.

(114):

1. Author(s): Poppy Puspitasari, Latief Setyo Budi

Title: Physical and Magnetic Properties Comparison of Cobalt Ferrite Nanopowder using Sol-gel and Sonochemical Methods.

Inernational Journal of Enginering Transaction B: Application, Iran, 2020, Vol 3, ISSN: 1728-144X

2. Author(s): Poppy Puspitasari, Johan Wayan Dika

Title: Casting Quality Enhancement using New Binders on Sand Casting and High Pressure Rheo Die Casting

Progress in Physics of Metal, Russia, 2019, Vol 20, ISSN: 1757-8981

3. Author(s): Poppy Puspitasari, Alief Muhammad

Title: Determination of the Magnetic Properties of Manganese Ferrite by Coprecipitation Method at Different pH Concentrations

High Temperature Material Process, 2018, Vol 22, ISSN: 1940-4360

4. Author(s) : Poppy Puspitasari

Title: Hardness and Microstructure Investigation of Steel Rod ST42 Coated by Chrome Steel using Wire Arc Spray Coating

Journal of Achievements in Materials and Manufacturing Engineering, 2018, Vol 90, ISSN: 1734-8412

5. Author(s) : Poppy Puspitasari

Title: Morphology of Aluminium with Nickel Addition on Sand Casting Process

Journal of Achievement in Materilas and Manufacturing Engineering, 2018, Vol 87, ISSN: 10.5604/01.3001.0012.0734

6. Author(s): Poppy Puspitasari, M. Ilman Nur Sasongko

Title: Properties of MnO Doped Graphene Synthesized by Co-Precipititaion Method

Functional Materials, 2018, Vol 25, ISSN: 1027-5495


 

Activities in specialist bodies over the last 5 years

Organisation

Role

Period

Membership without a specific role need not be mentioned

Name

Dr. Prihanto Trihutomo

Post

Mechanical Engineering, Associate Professor

Academic
career

Mechanical Engineering

Energy Convertion



Mechanical Engineering

(Energy Convertion)



Mechanical Engineering 

State University of Malang

Brawijaya

University of Malang 


Brawijaya

University of Malang 


National Institute of Technology Malang

2006


2016-2020


2003-2005 



1995-1999

Employment

Lecturer

State University of Malang

2006

Research and development projects over the last 5 years

1. Effect of Clathrin Protein Addition on Characteristics, Efficiency and Durability of Dye-Sensitized Solar Cells (2019)

Industry collaborations over the last 5 years

Patents and proprietary rights

   

Important publications over the last 5 years

1. Author(s): Prihanto Trihutomo, Sudjito Soeparman, Denny Widhiyanuriyawan, Lilis Yuliati

Title: Performance Improvement of Dye-Sensitized Solar Cell- (DSSC-)Based Natural Dyes by Clathrin Protein

Hindawi International Journal of Photoenergy Volume 2019, Article ID 4384728, 9 pages https://doi.org/10.1155/2019/4384728


2. Author(s): Prihanto Trihutomo, Sudjito Soeparman, Denny Widhiyanuriyawan, Lilis Yuliati

Title: Zwitterion Effect of Cow Brain Protein towards Efficiency

Improvement of Dye-Sensitized Solar Cell (DSSC)


Hindawi The Scientific World Journal Volume 2020, Article ID 7910702, 12 pages https://doi.org/10.1155/2020/7910702



3. Author(s): Prihanto Trihutomo, Sudjito Soeparman, Denny Widhiyanuriyawan, Lilis Yuliati

Title: Role of Clathrin Protein to Increase Electric Current on Dye-

Sensitized Solar Cell (DSSC) Based Natural Dyes


IOP Conf. Series: Materials Science and Engineering 546 (2019) 072010 IOP Publishing doi:10.1088/1757-899X/546/7/072010

Activities in specialist bodies over the last 5 years

Organisation

Role

Period

Membership without a specific role need not be mentioned

Name

Dr. Retno Wulandari, S.T., M.T.

Post

Mechanical Engineering, Associate Professor

Academic
career

Doctoral of Mechanical Engineering (Energy)

Magister of Mechanical Engineering (Energy)

Bachelor of Mechanical Engineering (Energy)

Brawijaya University 

Brawijaya University

Brawijaya University

2009-2016


2001-2004 


1993-1998

Employment

Lecturer

Universitas Negeri Malang

1999-now

Research and development projects over the last 5 years

1. Simulation of Fluid Flow through Open and Close Blades Turbine Systems That Adapt Goose Feet at Free Water Flow using CFD Tool (2020)

2. Design and Manufacturing of 5 Axis CNC Milling for Making Jet Engine (2019)

3. Disemination of Attractor Technology of Ngengat Pest (Spodoptera exigua) to the Shallot’s Farmers Group in Kabupaten Probolinggo (2019)

4. Measurement of Student’s Learning Interests in Fluid Mechanics Subject through Project Based Learning Model Using SCAMPER Strategies (2018)

4. Flow Behavior and Mixing of Glycerin-Nitrate on Stable Hydrodynamic Conditions in a Dynamic Stirring System (2016)

5. Utilization on Rural Water Energy Through Development Design of Goose-Leg Next-G Waterwheel for Extracting Free Water Flow Energy (2015-2016)

Industry collaborations over the last 5 years

Patents and proprietary rights

1. Distillation of Seawater using a Fresnel Lens



2020



Important publications over the last 5 years

1. Author(s): Retno Wulandari, Pingkan Sihassaleh, Ramadani, Rofik Pribawanto, Abdurrahman Zaqi Habibie, Muhammad Najib Mauludi, Yusuf Prasetyo Gemilang, and Mochammad Fafa Al Fikkri

Title: Goose Foot Water Turbine Performance with Variation of Fins Quantity and Turbine Depth Using Computational Fluid Dynamics (CFD) Approach (IOP Conf. Ser.: Mater. Sci. Eng. 2020)

2. Author(s): Retno Wulandari, Andoko

Title: Simulation on CNC 5 Axis Milling Spindle Bolt using Finite Element Methods (IOP Conf. Ser.: Mater. Sci. Eng. 2019)

3. Author(s): Retno Wulandari, Alfian Mizar, Rr. Poppy Puspitasari

Title: Increasing the Weight of Onion Bulbs due to the Reduction of Spodoptera Exigua Using A Portable Light Trap 2019 (IOP Conf. Ser.: Mater. Sci. Eng. 694 012010) 

4. Author(s) : Retno Wulandari, Rangga Ega Santoso

Title: Measurement of Student’s Learning Interests in Fluid Mechanics Subject through Project Based Learning Model Using SCAMPER Strategies (Advances in Social Science, Education and Humanities Research, Vol. 242, 2018)

5. Author(s) : Retno Wulandari, M. Alfian Mizar, Andoko, and Avita Ayu P.

Title: Optimization Design of Goose-Leg Waterwheel Next-G to Extract Energy of Free Water Flow (AIP Conference Proceedings 1778, 030068 (2016); doi: 10.1063/1.4965802)

6. Author(s): Retno Wulandari

Title: A CFD Analysis of the Viscous Fluid Behavior of Glycerin 

in Various of Stirring Patterns 2016 (Applied Mechanics and Materials, Vol. 836, pp. 132-2138)

7. Author(s): Retno Wulandari

Title: Continuous and non-Continuous Stirring Patterns for Reactive Mixing Process of Glycerin 2015 ((International Journal of Applied Engineering Research, Vol. 10, Number 11)

Activities in specialist bodies over the last 5 years

Organisation

Role

Period

Membership without a specific role need not be mentioned

Name

Dr. Sukarni, S.T., M.T.                         

Post

Mechanical Engineering, Associate Professor

Academic
career

Doctoral of Mechanical Engineering (Energy)

Magister of Mechanical Engineering (Energy)

Bachelor of Mechanical Engineering (Energy)

University of Brawijaya 

University of Gadjah Mada

University of Brawijaya

2010-2014


1999-2003 


1990-1996

Employment

Lecturer

Universitas Negeri Malang

1997-now

Research and development projects over the last 5 years

1. Effect of the Addition of Activated Carbon on the Pyrolysis and Combustion Process of Arthrospira platensis to Optimize the Conversion of Microalgae into Alternative Renewable Fuels

Funded by Ministry of Higher Education Indonesia (2021-2023) 

Rp. 355.925.000

2. Thermal Behavior and Kinetic Parameters of Spirulina platensis−Combustible Solid Waste Blended Fuels as the Future Alternative Fuels

Funded by Ministry of Higher Education Indonesia (2018-2020) 

Rp. 307.000.000

3. Optimization of Microalgae Thermal Conversion: Effect of Demineralization Method and Graphene Oxide Nanoparticles as Catalysts

Funded by Universitas Negeri Malang (2020) 

Rp. 102.000.000

4. Production Processes Optimization, Thermal Characteristics, and Applications in Diesel Engines of Waste Cooking Oil Biodiesel with Metal Oxide Nanocatalysts

Funded by Universitas Negeri Malang (2020) 

Rp. 100.500.000

5. Thermal Characteristics and Reaction Kinetics of Pyrolysis and Combustion of Water Hyacinth-Coal Mixture: Efforts to Substitute Fossil Fuels with Renewable Materials

Funded by Universitas Negeri Malang (2019) 

Rp. 110.000.000

6. Potential dan Properties of Marine Microalgae Isochrysis galbana as a Renewable Fuel Alternative

Funded by Ministry of Higher Education Indonesia (2015-2016) 

Rp. 120.000.000

Industry collaborations over the last 5 years

Patents and proprietary rights

1. IoT Based Automatic Fish Feeding Tool With Flexible Settings

2. IoT Based Instruments For Monitoring and Controlling Water Quality with Flexible Settings and Integrated Multiple Pools



2020



2020

Important publications over the last 5 years

1. Author(s): Sukarni Sukarni

Title: Thermogravimetric analysis of the combustion of marine microalgae Spirulina platensis and its blend with synthetic waste

(Heliyon, 2020)

2. Author(s): Sukarni Sukarni, Sumarli Sumarli, Teguh Achmad Firdaus, Ardianto Prasetiyo, Poppy Puspitasari

Title: The Catalytic Impact of MnO Additive on the Selected Municipal Solid Waste Combustion Behavior Determined by Thermogravimetric Analysis 

(Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2020)

3. Author(s): Sukarni Sukarni, Sumarli Sumarli, Imam Muda Nauri, Ardianto Prasetiyo, Poppy Puspitasari

Title: Thermogravimetric Analysis on Combustion Behavior of Marine Microalgae Spirulina Platensis Induced by MgCO3 and Al2O3 Additives

(International Journal of Technology, 2019) 

4. Author(s) : Sukarni Sukarni, Uun Yanuhar, I. N. G. Wardana, Sudjito Sudjito, Nurkholis Hamidi, Widya Wijayanti, Yusuf Wibisono, Sumarli Sumarli, I. M. Nauri, Heru Suryanto

Title: Combustion of microalgae Nannochloropsis oculata biomass: Cellular macromolecular and mineralogical content changes during thermal decomposition

(Songklanakarin Journal of Science and Technology, 2018)

5. Author(s) : Sukarni Sukarni, Sumarli Sumarli, Imam Muda Nauri, Purnami Purnami, Akhmad al Mufid, Uun Yanuhar

Title: Exploring the prospect of marine microalgae Isochrysis galbana as sustainable solid biofuel feedstock.

(Journal of Applied Research and Technology, 2018)

6. Author(s): Sukarni, Sudjito, Nurkholis Hamidi, Uun Yanuhar, I. N. G. Wardana

Title: Thermogravimetric kinetic analysis of Nannochloropsis oculata combustion in air atmosphere

(Frontiers in Energy, 2015)

7. Author(s): Sukarni, Sudjito, Nurkholis Hamidi, Uun Yanuhar, I. N. G. Wardana

Title: Potential and properties of marine microalgae Nannochloropsis oculata as biomass fuel feedstock

(International Journal of Energy and Environmental Engineering, 2014)

Activities in specialist bodies over the last 5 years

Organisation

Role

Period

Membership without a specific role need not be mentioned

Name

Suprayitno, S.T., M.T., Ph.D

Post

Mechanical Engineering, Lecturer

Academic
career

Mechanical Engineering (lecturer)

Universitas Negeri Malang

1999-Now

Mechanical Engineering (Doctoral degree)

National Kaos=hsiung University of Science and Technology, Taiwan

2013-2018

Mechanical Engineering (Master Degree)

Universitas Brawijaya, Indonesia

2003-2005

Mechanical Engineering (bachelor degree)

Universitas Brawijaya, Indonesia

1991-1996

Employment

Lecturer

Universitas Negeri Malang

1999

Research and development projects over the last 5 years

1. Efficient engineering optimization for expensive problems

2013-2018 Doctoral research project


2. Aerodynamic robust optimization of NACA 0012 airfoil using Kriging assisted evolutionary algorithm.

2019  UM research grant

Rp. 75.000.000


3. Robust parameter design of SMAW process

2020  UM research grant

Rp. 11.650.000

Industry collaborations over the last 5 years

Patents and proprietary rights

  

Important publications over the last 5 years

    1. Optical design optimization of high contrast light guide plate for front light unit.  Published in  Microsystem Technologies (SCI, IF=1.587, Q3), online publication, 08 Januari 2019
    2. Optimum design of microridge deep-drawing punch using regional Kriging assisted fuzzy multiobjective evolutionary algorithm. Published in IEEE Access (SCI, IF=3.557, Q1), VOLUME 6, 2018
  • Robust design optimization via surrogate network model and soft outer array design. Published in International Journal of Production Research (IJPR) (SCI, IF=2.623, Q1). Volume 56, 2018 – Issue 4
  1. Evolutionary reliable regional Kriging surrogate for expensive optimization . Published in Engineering optimization (SCI, IF=1.728, Q1)  Volume 51, 2019 – Issue 2
  2. Evolutionary reliable regional Kriging surrogate and soft outer array for robust engineering optimization . Published IEEE Access (SCI, IF=3.557, Q1). VOLUME 5, 2017
  3. Evolutionary Algorithm Using Progressive Kriging Model and Dynamic Reliable Region for Expensive Optimization Problems. Conference paper. Presented in the 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), Johor Bahru, Malaysia
  4. Evolutionary Algorithm Using Progressive Kriging Model and Dynamic Reliable Region for Expensive Optimization Problems. Conference paper. Presented in IEEE International Conference On Systems, Man, And Cybernetics (SMC 2016), Budapest, Hungary.
  5. Optimum Design of Microridge Deep Drawing Punch Using Regional Kriging Assisted Fuzzy Multi-objective Evolutionary Algorithm. Conference paper. Presented in The 12th International Student Conference on Advanced Science and Technology (ICAST 2017), Kaohsiung, Taiwan.
  6. Reliability-based Robust Design Optimization for Correlated Variables Using Sequential Surrogate assisted Evolutionary Algorithm. Conference paper. Presented in 2019 IEEE Congress on Evolutionary Computation. Wellington, New Zealand.
  7. Airfoil Aerodynamics  Optimization Under Uncertain Operating Conditions. Conference paper. Presented in International Conference on Vocational Education of Mechanical and Automotive Technology 2019. Yogyakarta, Indonesia.

Activities in specialist bodies over the last 5 years

Organisation

Role

Period

Membership without a specific role need not be mentioned

id_ID